IP44 Super Bright Outdoor Solar LED Motion Sensor Light Waterproof 45 lumen

Solar Outdoor Motion Sensor Led Light SMD LED Super Bright White
 

• APPLICATION 

This solar light can be used in any location where you want quick and automated 

lighting. It was originally designed for plastic toilet facilities, but can be use for a

variety of applications. Such as canopies for bikies, sheds, plastic toilet, garages, 

carports, roof, etc. 

• INSTALLATION

The light is very easy to install. Simply cut a hole of 38mm diameter in roofing 

and insert the light through, screwing the holding plate and light cover back on 

one in piece. The light will turn on automatically at night when movement detected. 

• PARTS 

1--- 1 x LED lamp and integrated solar panel
2---1 x Operation Manual
 

• OPERATION 

The light obtains day/night sensor and PIR motion sensor. It will be activated when  

people present or move in detecting zone. The light will last on as long as movement 

detected and it will turn off in 40 seconds after detecting zone is clear. 

• Notes

1.In order to avoid the rain leak in through the driving hole, it is suggested adding 

a round soft material between light and holding plate or use glass cement to glue all 

round of the light. So that water will not leak into the house and even vapor cannot 

goes into the lamp. 

2.Make sure the switch is on and leave it for sun charge and 8 hours is needed for  

first time use. 

3.The light is not suggest to install where have intense air flow or over cold or over 

heat place, such as air-condition, as these will influence the PIR sensor function. 

4.The battery is soldered in the light. Do not repair the light by yourself unless you 

are a professional electrician. Or call the local retailer for replacement.