|Product Name:||Solar Shed Light With Motion Sensor||Light Type:||Solar, Energy Saving, LED|
|Battery:||18650 Lithium Battery||Application:||Residential, Driveway|
|Beam Angle(°):||180 Degree Max||Working Lifetime(hour):||50000|
1000lumens Solar Shed Light,
18650 Lithium Battery Solar Shed Light
Super Brightness 1000lumens Solar Shed Light With Motion Sensor
|Solar panel||Polycrystalline 5V 3W|
|Rech. batt.||Li-ion bat.,3.7V 4000mAh|
|Operation||Light sensor and PIR motion sensor|
|Motion detector||angle 180° and 12m distance range|
|Funtion||1)Power ON/OFF switch|
|2)Delay Time 45 seconds|
|3)indicator light when swicth ON|
Before install the unit, turn on the switch which locate at the plastic box of the
light, and cover the motion sensor head by hand very closely to ensure the light
can turn on after some seconds. Then you can start to install the light as follow.
Choose a place where need lights at night and the select location should better
situate the solar panel where there is abundant sunshine during the day.
Mark the hole location of the solar panel box, then set the solar panel aside.
Check that the marked areas are clear of obstacles such as cables and electrical
lines. Drill holes for the enclosed screws and plastic anchors.
Measure the space between the two hoes on the lamp and drill another hole on the
wall accordingly. Insert the dry anchor and screw.
Secure the lamp in place with the screws.
Carefully route the power code of the solar panel to the lamp and connect it with the
cable from lamp.
Swivel the motion head so that it faces the area where movement will occur and
tighten the lock.
1.Turn on the power switch to “ON” to activate the solar security light.
2.The light will automatically turn ON during the night.
3.Test the light by walking or driving into the protected area.
4.The lamp should light up temporarily when motion is detected.
5.The light will be remaining as long as the motion moves and detects.
6.The light will turn off within 45 seconds after motion disappear.
Batteries should not be stored unless fully charged. Storing a battery on an
empty charge will destroy it. If you are going to turn the unit off for a long period
of time, please charge the unit for about 20 hours and then turn the switch off.
Contact Person: elin